PSB SPEAKER ALPHA T20 KULE TİPİ HOPARLÖR (ÇİFT)

Lifelike acoustics and detail
The T20 uses a ¾” (19mm) black anodized aluminium dome tweeter to extend the high-frequency response further than any Alpha ever before while lowering distortion to deliver a lush soundstage full of details. Unlike lesser designs at this price, all of the new Alpha Series tweeters employ ferrofluid cooling to prevent dynamic compression and a neodymium magnet for high sensitivity.

Developed for deep, detailed bass
Featuring PSBSpeakersexclusive dual 5¼” (133mm) woofer connected to a dual-layer voice coil for incredible conductivity, the newest Alpha Series tower provides remarkable low-frequency response and exceptional efficiency for a speaker at this price. Starting with a specially textured polypropylene cone that lowers distortion and reduces breakup, the woofer is perfectly matched with the tweeter at the crossover for a smooth sounding transition between high and low frequencies. It’s also backed with a rear-firing port that uses bass flex to tightly control the bass response and extend it even lower.

Reference crossover design
The redesigned Alpha Series tower features a new crossover that exceeds speaker standards with an innovative design that delivers the tightest control and the flattest frequency response. Developed for more than directing low and high frequencies to the individual drivers, the crossover used in the T20 employs a very advanced Acoustic Linkwitz-Riley filter design in the cross to lower distortion and create a large, detailed soundstage for the best listening experience.

Crafted with precision
Using a special MDF material and a unique combination of wall thickness and bracing, the Alpha T20 Tower flawlessly controls resonances while leveraging a light internal material that has been accurately positioned to reduce standing waves. The sturdy, well-constructed cabinet is finished with a high-quality woodgrain vinyl and features acoustically-transparent magnetic grilles that make the speakers disappear into your décor without sonic interference.

· ¾” (19mm) Black anodized aluminium dome tweeter with front waveguide

· Two 5¼” (133mm) Textured polypropylene woofers with rubber surround

· Bass reflex cabinet design with a rear-firing port

· Acoustically-transparent detachable magnetic grilles

· Dual five-way gold-plated binding post speaker terminals

· High-quality woodgrain vinyl finish

· Available in Black Ash or American Walnut

Frequency Response

On Axis @ 0° ±3dB 36-21,000Hz

On Axis @ 0° ±1 1/2dB 54-20,000Hz

Off Axis @ 30° ±1 1/2dB 54-10,000Hz

LF Cutoff -10dB 28Hz

Sensitivity

Anechoic Chamber 88dB

Listening Room 90dB

Impedance

Nominal 8 Ohms

Minimum 6 Ohms

Input Power

Recommended 15 - 120 Watts

Program 60 Watts

Acoustic Design

Tweeter (Nominal) 3/4” (19mm)

Black Anodized Aluminum Dome with

Ferrofluid and Neodymium Magnet

Woofer (Nominal) 2 x 5 1/4” (133mm)

Textured Polypropylene Cone

with Rubber Surround

Crossover 2,500Hz, L4

Internal Volume 0.95 cu ft (27.0L)

Design Type Tuned Port Bass Reflex

2 1/2” (63.5mm) Rear Port

Dimensions / Weights / Finish

Size (W x H x D) 6 3/4” x 32 1/2” x 9 3/8” *

(170 x 825 x 243mm)

Weight 26.15lb (11.9kg)/each

62.7lb (28.5kg)/pr

Finish** Black Ash

Walnut

Notes * Non-metric measurements are approximate.

** Some finishes may not be available in all models and/or all countries.

All specifications are subject to change without notice.