STAND HARİÇTİR
The premium ProAc range, the ‘K Series’, is now entering its 10th year of production. The K3, K6, K8 and, most recently, the K6 Signature have proven to
be very popular choices for people looking for the ultimate in sound reproduction. Whilst enjoying this success we were constantly being asked for a stand mounted K Series. So we developed one.
The K1 is a special stand mounted version using the Kevlar cone as in the K range and the tweeter is also our proven ribbon unit. Certain modifications have been made to the cabinet, bass driver and tweeter to allow us to adapt and develop it until it was suitable for a stand mounted loudspeaker. Although the K1 is a stand mounted loudspeaker is has a surprisingly extended and accurate bass response with the
usual beautiful midrange from the K Series bass driver used within the K Series.
The unique K design which has been incorporated into the K1 sees a cabinet which is bottom ported and a specially designed, dedicated stand to complement and bring out the best in the K1. This K1 stand will be available separately from the loudspeakers.The K1, considering its size, gives an impressive sound stage for a stand mounted loudspeaker with an almost electrostatic open midrange and very accurate bass.We are sure that the K1 will not disappoint.
SPECIFICATION
NOMINAL IMPEDANCE 8Ω
RECOMMENDED AMPLIFIERS 10 - 150W
FREQUENCY RESPONSE 28Hz - 30kHz
SENSITIVITY 90dB linear for 1 Watt at 1 Metre
BASS/MIDRANGE DRIVERS Bass and midrange frequencies are both covered by a single 165mm (6.5”) Kevlar coned unit, the Kevlar cone covers all frequencies up to 3Khz and slightly above.
TWEETER ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping
CROSSOVER Finest components on dedicated dual layer circuit board. ProAc
multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi
Amplification
HEIGHT 569mm (22.4”)
WIDTH 264mm (10.4”)
DEPTH 401mm (15.8”)
WEIGHT 16kg (2.2lb) each
MODE Stand Mounting
GRILLE Acoustically transparent
crimplene
FINISH
Available in the following real wood veneers:
Black Ash, Mahogany, Cherry, Walnut, Oak
and Silk White.
Rosewood and Ebony and NEW Tamo Ash or Dark Eucalyptus can be ordered at extra cost.