Paradigm Monitor SUB 10 Subwoofer - Made in Canada
SPECIFICATIONS
|
|
Design
|
Single driver, acoustic suspension, built-in advanced Ultra-Class-D™ amplifier, USB port for PBK equalization, removable grille |
Amplifier High-Current Discrete Output |
900 watts Dynamic Peak; 300 watts RMS Sustained |
Amplifier Features
|
Auto-on/off, soft clipping, thermal protection
|
Bass Driver
|
254-mm (10 in) carbon-loaded polypropylene cone, NLC™ non-limiting corrugated Santoprene® surround, 38-mm (1-1/2 in) 4-layer copper-clad aluminum voice coil. Nomex® spider, 4.5 lb ferrite magnet, AVS™ die-cast heatsink chassis |
Low-Frequency Extension*
|
17 Hz (DIN)
|
Subwoofer Cut-Off Frequency
|
Variable 50 Hz – 150 Hz; bypass option |
Sub / Sat Phase Switch
|
Variable 0° or 180°
|
Line-Level Input
|
Two RCA (L/R-Mono) for L/R lineout or Sub-Out/LFE-Out of receiver/processor or other line-level source |
Height, Width, Depth (gloss side up, height is with feet) |
33.0 cm x 28.3 cm x 32.4 cm; 13 in x 11-1/8 in x 12-3/4 in |
Weight (unpacked)
|
10.9 kg / 24 lb
|
Accessories (sold separately)
|
PT-1 Wireless Transmitter; Perfect Bass Kit (PBK) |
Finish
|
Black Ash
|
PT-1 Wireless Transmitter
4 ADET SUBWOOFERI AYNI ANDA KESİNTİSİZ VE YÜKSEK KALİTEDE KABLOSUZ ÇALIŞTIRMA İMKANI .DÜNYADA TEK !!!
Compatible with:
Monitor SUB 8, Monitor SUB 10, Monitor SUB 12 and the MilleniaSub.
Not for use with any other brand of subwoofer.
In a typical listening room, the PT-1 transmitter has a maximum range of 50’ (15 m). Obstructions such as walls, large pieces of furniture, room dividers, etc. may reduce this range.
PT-1 Feature Set
- Selectable 3-position latency switch (see below)
- Fast, auto-reconnect upon power outage
- For use with up to 4 Paradigm or Paradigm Reference subwoofers
- Black finish
Latency Switch
The back-panel latency switch adjusts the delay between the PT-1’s audio signal input and the subwoofer receiver’s RF output, optimizing the integrity of the wireless transmission and minimizing distortion.
Bu ürüne ilk yorumu siz yapın!