Chord C-line 2RCA-2RCA Analog Ses Kablosu - 1 METRE

"Chord C-Line is up there with the best – and could easily go head-to-head with some rivals costing twice as much. Build quality is excellent but, more importantly, it has a lovely, open sound with good frequency extension, firm bass and smooth mid and treble. Anyone looking for a good interconnect without breaking the bank should put this at the top of their list.”

Hi-Fi World May 2015

Pseudo-balanced Oxygen free copper conductors

ARAY technology

Unique direct gold-plating technology

Fully floating high density shielding

Ultra reliable over-moulded strain relief

Available RCA to RCA in 1m and 0.5m lengths

The Chord C-line is an original Chord Company design with a unique conductor configuration inspired by our flagship Sarum Tuned ARAYinterconnects.  Like all Chord interconnects, the C-line has been designed to protect the precious audio signal from the high levels of high frequency interference filling most modern houses.  The C-line will produce a cleaner, more detailed sound than other, more conventional interconnects.

C-line is part of an award winning range of analogue and digitalconnections, including USB and streaming cables, HDMI, power and speaker cables - all designed and built in the UK to achieve the very best sound and picture from your hi-fi or AV system.

ARAY conductor geometry, multi-strand oxygen free copper signal and return conductors.  High density overwrapped foil shielding, reduces signal loss caused by high frequency interference.

Unique RCA plug gold-plating process improves signal transfer across audio frequencies.  Over moulded plug surround provides high reliabilityconnection for best performance.  Available in 1 metre and 0.5 metre lengths.

The Chord C-line is designed to work with all line level components, CD players, streaming devices, DVD players, home theatre amplifiers, tuners, phono stages, RCA equipped turntables and pre to power amplifierconnections.
 

Before installation

Switch off all equipment before fitting or removing cables.
Connect cable so the print on the cable reads away from the source component. The "C” of "Chord” should be nearest the source component.
Route the cable away from speaker cables and power cables.